1. Make an opening with dimensions (W+A) x (H+A) mm. A = 2 x thickness sleeve (e) + 20 mm.
Fit a sleeve of the same type and thickness of the duct (thickness e) of minimum 105mm deep for KAM, AVA (ME) and 125mm deep for KAM MP in the opening.
See details per type of shaft in the product’s installation guidelines.
2. Fasten and seal the mounting frame (see details per shaft type in the product’s installation guidelines). Two fastening plates are provided at the bottom and at the top of the mounting frame: fold these against the sleeve.
In case of fixing by screws, fasten the mounting frame to the sleeve with chipboard screws (6 x e) mm. These screws can be fixed in one of the openings provided for this purpose, depending on the depth of the sleeve. Take care not to misshape the frame during its installation. The finished opening must be the same size as the mounting frame (W+10) x (H+10) mm.
EASY-KAP (MP)
1. Make an opening with dimensions (W+A) x (H+A) mm. A = 2 x thickness sleeve (e) + 20 mm.
Fit a sleeve of the same type and thickness of the duct (thickness e) of minimum 105mm deep for KAM, AVA (ME) and 125mm deep for KAM MP in the opening.
See details per type of shaft in the product’s installation guidelines.
2. Fasten and seal the mounting frame (see details per shaft type in the product’s installation guidelines). Two fastening plates are provided at the bottom and at the top of the mounting frame: fold these against the sleeve.
In case of fixing by screws, fasten the mounting frame to the sleeve with chipboard screws (6 x e) mm. These screws can be fixed in one of the openings provided for this purpose, depending on the depth of the sleeve. Take care not to misshape the frame during its installation. The finished opening must be the same size as the mounting frame (W+10) x (H+10) mm.
There are no reviews yet.